Appletalk
..
Configure an Appletalk Phase I Address for an Interface. The no form of this command
removes the Appletalk interface itself.
To Enable:
To Disable:
Name
network.node
3-6
appletalk address <network.node>
[no] appletalk address
Table 3-3. Parameters, Keywords, Arguments
Definition
• network - A 16-bit network number between 0
and 66279.
• node - An 8-bit node number between 0 and
254.
Separate the network and node values with a period.
When omitted, the Appletalk address defaults to 0.0.
Cajun P550/P220 Command Line Interface Reference Guide