IPX
.'
*.
*
Change the delay when responding to IPX Get Nearest Server (GNS) requests. The no
form of this command restores the default. The default is zero, which indicates no delay.
To Enable:
To Disable:
Name
milliseconds
Cajun(config-if:serial0)# ipx gns-response-delay 200
3-10
ipx gns-response-delay <milliseconds>
[no] ipx gns-response-delay <milliseconds>
Table 3-4. Parameters, Keywords, Arguments
Definition
The time, in milliseconds, that the Cisco IOS
software waits after receiving a GNS request from an
IPX client before responding with a server name to
that client. The range is 0 to 5000 milliseconds.
Cajun P550/P220 Command Line Interface Reference Guide