IPX
.' .*.*
Set the interpacket delay for Service Advertising Protocol (SAP) updates sent on a single
interface. The no form of this command results in no interpacket delay. The default state
is enabled, which is a 55 millisecond delay.
Note: On the Cisco system, this command takes a delay. On the Cajun system, it is a
Boolean.
Cajun(config-if:serial0)#
3-14
To Enable:
ipx output-sap-delay
To Disable:
[no] ipx output-sap-delay
ipx output-sap-delay
Cajun P550/P220 Command Line Interface Reference Guide