Ip Rip Send-Receive-Mode - Lucent Technologies Cajun P550 Cli Reference Manual

. .  **

    
   
Set the RIP Send and Receive mode on an interface. The default state is talk-listen.

 
To Enable:
Name
talk-only|
listen-only|
talk-listen
 
Cajun(config-if:serial0)# ip rip send-receive-mode listen-only
Cajun P550/P220 Command Line Interface Reference Guide
ip rip send-receive-mode [talk-only|listen-only|
talk-listen]
Table 2-7. Parameters, Keywords, Arguments
Definition
Set the RIP Send and Receive mode on an interface.
• talk-only - Set RIP to only transmit updates on
the interface and not receive them.
• listen-only - set RIP to only receive updates on
the interface and not transmit them.
• talk-listen - set RIP to transmit and receive
updates on the interface.
IP-RIP
2-9