Area Nssa - Lucent Technologies Cajun P550 Cli Reference Manual

OSPF
 

   " '
   
Configure an area as a Not So Stubby Area (NSSA). To remove the NSSA distinction
from the area, use the no form of this command.

 
Name
area-id
 
Cajun45(configure router:ospf)# area 2.0.0.0 nssa
Cajun45(configure router:ospf)# no area 2.0.0.0 nssa
10-6
To Enable:
area <area-id> nssa
To Disable:
[no] area <area-id> nssa
Table 10-4. Parameters, Keywords, Arguments
Definition
A decimal value or IP address that identifies an OSPF
area. Use no area <area-id> to remove an area from
the software configuration.
Cajun P550/P220 Command Line Interface Reference Guide