Set Port Vlan-Binding-Method - Lucent Technologies Cajun P550 Cli Reference Manual

Port
 .  *  * 

 
  
   
Set VLAN binding method for a specified switch port or all switch ports on a specified module.
Command Syntax
To Enable:
Name
mod-num
mod-swport-range
bind-to-all
bind-to-received
static
 
This example sets the port vlan to bind-to-all.
Cajun(configure)# set port vlan-binding-method 3/1 bind-to-all
Port vlan-binding-method set: 3/1.
12-38

set port vlan-binding-method

{<mod-num>|<mod-swport-range>}
[...,{<mod-num>|<mod-swport-range>}]
{bind-to-all|bind-to-received|static}
Table 12-28. Parameters, Keywords, Arguments
Definition
Specifies a module number. If a module number is
specified, the VLAN binding method is set for all
ports on the module.
Specifies a switch port or a range of switch ports on which
to set the VLAN binding method.
Binds the port to all VLANs known to the switch.
Binds this port to any VLAN it receives traffic from.
Assigns VLAN membership manually, using the
VLAN switch ports.
Cajun P550/P220 Command Line Interface Reference Guide