Set Port Rate-Limit-Burst-Size - Lucent Technologies Cajun P550 Cli Reference Manual

Port
 . ***+


 
  
   
Set the rate limit burst size for fast ethernet ports.
Note: Setting this parameter on any M5548-100TX port (Tamale) sets all physical
ports on the module to the same value.
Command Syntax
To Enable:
Name
mod-num
mod-port-range
1|2|4...1028|2048
12-28

set port rate-limit-burst-size

{<mod-num>|<mod-port-range>}
[...,{<mod-num>|<mod-port-range>}]{1|2|4|8|16|32|64|128|
256|512|1024|2048}
Table 12-20. Parameters, Keywords, Arguments
Definition
Specifies the number of the module where the rate limit
burst size for each fast ethernet port on the module is to be
set.
Specifies the range of fast ethernet where the rate limit
burst size is to be set.
The rate limit burst size options.
Cajun P550/P220 Command Line Interface Reference Guide