Set Vtp-Snooping Domain - Lucent Technologies Cajun P550 Cli Reference Manual

 .* .  

 
  
   
Defines the VTP domain name from which the switch is to learn from Cisco VTP frames.
The clear form of this command can be used to clear any learned or defined domain
name. The default is the domain name is initialized to a NULL string when starting with
default parameters.
!    
The domain name can be automatically learned in approximately learned in
approximately 5 or less minutes from the Cisco VTP server, provided this switch's
vtp-domain-name is Null and its vtp-snooping state is set to "Enable."

 
To Enable:
To Disable:
Name
name
 
Cajun(configure)# set vtp-snooping domain Corporate
vtp-snooping parameter modified.
Cajun(configure)#
Cajun P550/P220 Command Line Interface Reference Guide
set vtp-snooping domain <name>
clear vtp-snooping domain
Table 21-5. Parameters, Keywords, Arguments
Definition
The Cisco VTP domain name to which this switch is
to listen for VTP messages.
VLAN
21-9