. ,-
Display IP static routes or the default gateway.
To View:
Name
static|default-
gateway|local
dest-ip-addresses
if-name
Cajun P550/P220 Command Line Interface Reference Guide
show ip route [{static|default-gateway|local}]
[<dest-ip-addresses>][<if-name>]
Table 17-5. Parameters, Keywords, Arguments
Definition
The different types of routes are:
• static - When run on the M5500/M2200, show
ip route static is equivalent to the Cajun CLI
command: net ip display static_routes.
• default-gateway - Does not have a legacy
equivalent, but does display the same
information provided by the default gateway box
on the IP Configuration Web page.
• local - Shows all non-static (and omits the
default gateway line) from the output. You may
enter a destination IP address and/or an interface
name that will be matched against the table of
interest. If you enter show ip route local
111.111.111.111 Ethernet, then the local routes
will be searched for a destination address of
111.111.111.111 that is associated with the
Ethernet Management Interface. You may enter
any combination of local, destination IP address
and interface.
The IP addresses of the ARP cache.
The name of the interface for the ARP cache.
Switch IP
17-9