Ip Access-Group - Lucent Technologies Cajun P550 Cli Reference Manual

Policy
. *.

 
  
   
Configure forwarding control with an access list name. The no form of this command
removes an access list name from forwarding control. The default is to permit. Cisco's
version of this command is an interface command mode.

 
To Enable:
To Disable:
Name
access-list-name
default-action-deny
 
This example applies the access-list fwdrules to forwarding.
Cajun(configure)# ip access-group fwdrules
   
11-2
ip access-group <access-list-name>
[default-action-deny]
[no] ip access-group
Table 11-1. Parameters, Keywords, Arguments
Definition
The name of the access list for forwarding control.
Specifies the default action of "deny" if no access
rule in the active access list matches the packet.
Cajun P550/P220 Command Line Interface Reference Guide