Ip Dvmrp Prune-Retransmit-Interval - Lucent Technologies Cajun P550 Cli Reference Manual

. . . * * 

   "#
   
Set the DVMRP prune message retransmit interval. Use the no form of this command to
return to the default value of 3 seconds.

 
To Enable:
To Disable:
Name
prune-retransmit-int
  
This example configures the ip dvmrp prune message retransmit interval for ten seconds.
Cajun(configure router:dvmrp)# ip dvmrp prune-retransmit-interval
?
<prune-retransmit-int> - Prune message retransmit interval (3-13)
sec
Cajun(configure router:dvmrp)# ip dvmrp prune-retransmit-interval
10
   
Cajun P550/P220 Command Line Interface Reference Guide
ip dvmrp prune-retransmit-interval <prune-retransmit-int>
[no] ip dvmrp prune-retransmit-interval
Table 6-8. Parameters, Keywords, Arguments
Definition
The DVMRP prune message retransmit interval. The
interval is measured in seconds. The range is 3-13
seconds.
DVMRP
6-11