.' .*'*.+
Configure the maximum packet size of Service Advertising Protocol (SAP) updates sent
out the interface. The no form of this command disables this function. The default state
is disabled.
Note: On a Cisco system, this command takes packetsize. On the Cajun system, it is a
Boolean.
Cajun(config-if:serial0)# ipx sap-max-packetsize
Cajun P550/P220 Command Line Interface Reference Guide
To Enable:
ipx sap-max-packetsize
To Disable:
[no] ipx sap-max-packetsize
IPX
3-25