IP-RIP
"
Define the neighbors with which to exchange routing information. The no form of this
command removes a neighboring router entry. The default state is: no neighboring
routers are defined.
CAUTION:Adding one or more RIP neighbors ensures that the router only
Name
ip-address
This example specifies the peer router at 123.1.1.1 is the neighboring router with which
to exchange routing information.
Cajun(configure router:rip)# neighbor 123.1.1.1
2-10
accepts information from these neighbors. Consequently, all other
information is filtered. Do not create RIP neighbor(s) if you do not
want to filter RIP information from the network.
To Enable:
neighbor <ip-address>
To Disable:
[no] neighbor <ip-address>
Table 2-8. Parameters, Keywords, Arguments
Definition
IP address of a peer router with which routing
information will be exchanged.
Cajun P550/P220 Command Line Interface Reference Guide