. . **
Set the RIP default route characteristics. The no form of this command disables the
default route characteristics.
To Enable:
To Disable:
Name
talk-only|
listen-only|
talk-listen|disable
Cajun(config-if:serial0)# ip rip default-route-mode talk-listen
Cajun P550/P220 Command Line Interface Reference Guide
ip rip default-route-mode {talk-only|listen-only|
talk-listen|disable}
[no] ip rip default-route-mode {talk-only|
listen-only|talk-listen|disable}
Table 2-4. Parameters, Keywords, Arguments
Definition
The RIP default route characteristics.
• talk-only - The default route is advertised in RIP
updates but ignored on incoming neighbor
updates.
• listen-only - The default route is suppressed
from RIP updates but accepted on incoming
neighbor updates.
• talk-listen - The default route is advertised and
accepted.
• disable - The default route is not advertised or
accepted.
IP-RIP
2-5