Ipx Sap-Name-Filter - Lucent Technologies Cajun P550 Cli Reference Manual

.' .* * 

    
   
Specify which services (by name) are present in SAP packets sent and received on the
interface. The no form of this command removes a filter from the interface.

 
To Enable:
To Disable:
Name
precedence
filter-name
service-type
Cajun P550/P220 Command Line Interface Reference Guide
ipx sap-name-filter <precedence> <filter-name>
<service-type> {outbound|inbound|both} {filter| allow}
[<filter-hops>]
[no] ipx sap-name-filter <precedence> <filter-name>
<service-type> {outbound|inbound|both} {filter| allow}
[<filter-hops>]
Table 3-11. Parameters, Keywords, Arguments
Definition
A number indicating the precedence of this SAP
name filter in relation to other SAP name filters on
this interface. Lower numbers indicate a higher
precedence. The range is 0-9999.
The name of the service that this filter matches. The
filter-name is compared against the Service name for
a match. A single asterisk may be present as the last
character of filter-name, which matches all
remaining characters. Up to 1 to 63 bytes are
allowed.
The number of the IPX service type, in hexadecimal.
This is between 0 and FFFF, where FFFF matches all
service types.
IPX
3-27