.. *
Set the Appletalk Interface MAC format to be used. The default value is snap. The no
form of this command resets the MAC format for the interface to the default value.
To Enable:
To Disable:
Name
ethv2|snap
This example sets the Appletalk Interface MAC format to ethv2.
Cajun(config-if:serial0)# appletalk mac-format ethv2
Cajun P550/P220 Command Line Interface Reference Guide
appletalk mac-format {ethv2|snap}
[no] appletalk mac-format
Table 3-7. Parameters, Keywords, Arguments
Definition
• ethv2 - Ethernet Version 2.
• snap - Subnetwork Access Protocol.
Appletalk
3-11