Set Spantree Maxage - Lucent Technologies Cajun P550 Cli Reference Manual

 .  '

 
   
Sets the maximum message age for a bridge. The default age time is 20 seconds.

 
To Enable:
Name
maxage-value
802.1D
vlan-id
vlan-name
 
This example sets the spanning tree maximum age to 25 seconds.
Cajun(configure)# set spantree maxage 25 802.1D
Bridge MaxAge Successfully set to 25
Cajun P550/P220 Command Line Interface Reference Guide
set spantree maxage <maxage-value> {802.1D|vlan
{<vlan_id> name <vlan-name}}
Table 15-6. Parameters, Keywords, Arguments
Definition
The maximum age value for the bridge, in seconds.
Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be
Configure a per-vlan or dual-layer bridge by using
the VLAN's vlan ID.
Note: LAN bridges can only be modified
Configure a per-vlan or dual-layer bridge by using
the VLAN's name.
Note: VLAN bridges can only be modified
modified when in ieee config mode.
when in per-vlan or dual-layer mode.
when in per-vlan or dual-layer mode.
STAP
15-7