.' .*.
Configure the interval at which a network's RIP entry ages out. The no form of this
command restores the default. The default value is three times the RIP update
interval.
To Enable:
To Disable:
Name
multiplier
Cajun(config-if:serial0)#
Cajun P550/P220 Command Line Interface Reference Guide
ipx rip-multiplier<multiplier>
[no] ipx rip-multiplier<multiplier>
Table 3-7. Parameters, Keywords, Arguments
Definition
The multiplier used to calculate the interval at which
RIP routing table entries age out. This can be any
positive number.
The value you specify is multiplied by the RIP update
interval to determine the aging-out interval.
ipx rip-multiplier 40
IPX
3-19