Switch Fab
*
*
Enable the configuration of redundant (switch fabric) hardware. The default state is enabled.
This command does not have reverse mapping. The configuration is both user and run-time
modified.
Command Syntax
To Enable:
Name
enable|disable
This example sets the redundant hardware to disabled.
Cajun(configure)# set fabric configure-redundant-hardware disable
16-2
set fabric configure-redundant-hardware {enable|disable}
Table 16-1. Parameters, Keywords, Arguments
Definition
Required parameter indicating that the setting for the
redundant hardware is either enabled or disabled.
Cajun P550/P220 Command Line Interface Reference Guide