Set Spantree Fwddelay - Lucent Technologies Cajun P550 Cli Reference Manual

 .  

 
  
   
Set the forward delay time for a bridge. The default time is 15 seconds.

 
To Enable:
Name
fwddelay-value
802.1D
vlan-id
vlan-name
 
This example sets the spanning tree forward delay to 12 seconds.
Cajun(configure)# set spantree fwddelay 12 802.1D
Bridge Forward Delay Time Successfully set to 12
Cajun P550/P220 Command Line Interface Reference Guide
set spantree fwddelay <fwddelay-value> {802.1D|vlan
{<vlan-id>|name <vlan-name>}}
Table 15-4. Parameters, Keywords, Arguments
Definition
The forward delay value for the bridge, in seconds.
Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be
Configure a per-vlan or dual-layer bridge by using
the VLAN's vlan ID.
Note: VLAN bridges can only be modified
Configure a per-vlan or dual-layer bridge by using
the VLAN's name.
Note: VLAN bridges can only be modified
modified when in ieee config mode.
when in per-vlan or dual-layer mode.
when in per-vlan or dual-layer mode.
STAP
15-5