Ip Dvmrp Timers Basic - Lucent Technologies Cajun P550 Cli Reference Manual

. .  

   "#
   
Adjust the DVMRP network timers. Use the no form of this command to return to the
default values.

 
To Enable:
ip dvmrp timers basic <rte-update> <rte-expire> <rte-holddown>
To Disable:
[no] ip dvmrp timers basic
Name
rte-update
rte-expire
rte-holddown
Cajun P550/P220 Command Line Interface Reference Guide
Table 6-11. Parameters, Keywords, Arguments
Definition
Configures the DVMRP route reporting interval. The
range of frequencies at which updates are sent is
30-90 seconds. The default value is 60 seconds.
Interval of time, in seconds, after which a DVMRP
route expires. The interval range is 70-190 seconds.
The default value is 140 seconds.
The amount of time, in seconds, that must pass
before the route is removed from the routing table.
The range is 140-380 seconds. The default value is
120 seconds.
DVMRP
6-15