Set Aft Auto-Sizing-Threshold - Lucent Technologies Cajun P550 Cli Reference Manual

   *+ *  

 
  
   
Set the AFT auto sizing threshold (percentage before auto-incrementing hash tables).
The default percentage is 40%.

 
To Enable:
Name
threshold-value
 
This example sets the aft auto sizing threshold to 60%.
Cajun(configure)# set aft auto-sizing-threshold 60
AFT Auto Sizing Threshold successfully set to 60%
Cajun P550/P220 Command Line Interface Reference Guide
set aft auto-sizing-threshold <threshold-value>
Table 2-4. Parameters, Keywords, Arguments
Definition
Enter the desired percentage full that a hash table
must be before it auto-increments itself. Valid values
range from 5-90 percent.
AFT
2-5