.
Enable or disable individual spanning tree bridges. The default state is enabled.
To Enable:
Name
enable
disable
802.1D
vlan-id
vlan-name
Cajun(configure)# set spantree disable 802.1D
Bridge successfully disabled
Cajun P550/P220 Command Line Interface Reference Guide
set spantree {enable|disable} {802.1D | vlan {<vlan-id> |
name <vlan-name>}}
Table 15-2. Parameters, Keywords, Arguments
Definition
Enable the bridge.
Disable the bridge.
Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be
Configure a per-vlan or dual-layer bridge by using
the VLAN's vlan ID.
Note: VLAN bridges can only be modified
Configure a per-vlan or dual-layer bridge by using
the VLAN's name.
Note: VLAN bridges can only be modified
modified in the IEEE config mode.
when in per-vlan or dual-layer mode.
when in per-vlan or dual-layer mode.
STAP
15-3