. *
Set the MAC format of the IP interfaces. The no form of this command restores the
default ethv2.
To Enable:
To Disable:
Name
ethv2|snap
This example sets the MAC format of the IP interfaces, on serial interface 0, to the
Subnetwork Access Protocol (snap).
Cajun(config-if:serial0)# ip mac-format snap
Cajun P550/P220 Command Line Interface Reference Guide
ip mac-format {ethv2|snap}
[no] ip mac-format {ethv2|snap}
Table 1-9. Parameters, Keywords, Arguments
Definition
Set the MAC format of the IP interface to either
ethv2, which is the default, or to snap (Subnetwork
Access Protocol).
IP
1-13