Show Ip Route - Lucent Technologies Cajun P550 Cli Reference Manual

Switch IP
  . 

   
   
Display the IP routing table. When run on the M5500/M2200, it is equivalent to Cajun
CLI command: net ip display route_table. There is no "back-end" on this command.

 
 
Cajun> show ip route
Codes:
2 route
o 0.0.0.0 0.0.0.0 via 192.168.0.1, 0:0:0, 192.168.0.115
L 192.168.0.0 255.255.255.0 via 192.168.0.115, 0:0:0, 192.168.0.115
    %% &
17-8
To View:

show ip route

I - IGRP derived, R - RIP derived, O - OSPF derived
C - connected, S - static, E - EGP derived, B - BGP derived
* - candidate default route
ia - OSPF intra area route
E1 - OSPF external type 1 route, E2 - OSPF external type
L1 - IS-IS level-1 route, L2 - IS-IS level-2 route
IC - ICMP derived, G - GGP derived, e - ES-IS derived
IG - IGP derived, ID - IDPR derived, EG - EIGRP derived
H - hello, L - local, N - Netmgmt, o - Other
IA - OSPF inter area route
Cajun P550/P220 Command Line Interface Reference Guide