Huntgroups
.
Create a huntgroup, modify an existing huntgroup or remove a huntgroup. If no load-sharing
value is specified, then a huntgroup is created with load-sharing enabled. Use the clear huntgroup
form of this command to remove a huntgroup.
To Enable:
To Disable:
Name
huntgroup-name
load-sharing
This example creates huntgroup hg1 and disables load-sharing.
Cajun(configure)# set huntgroup hg1 load-sharing disable
HuntGroup "hg1" created
7-2
set huntgroup <huntgroup-name> [load-sharing {enable|disable}]
clear huntgroup <huntgroup-name>
Table 7-1. Parameters, Keywords, Arguments
Definition
The unique string used to identify a huntgroup. If
the name is not unique to the huntgroup, then it is
assumed that an existing huntgroup is being
modified.
The load sharing capability.
• enable|disable - Enables or disables load
sharing.
Cajun P550/P220 Command Line Interface Reference Guide