.*
Set up the community access string. Use the no form of this command to remove the specified
community string. The default setting for community string access is read-only (ro).
To Enable:
To Disable:
Name
string
Cajun> snmp-server community rw_public rw normal
Cajun P550/P220 Command Line Interface Reference Guide
snmp-server community <string>{ro|rw |none}[{normal|
admin}]
[no] snmp-server community <string>
Table 14-11. Parameters, Keywords, Arguments
Definition
Community string that acts like a password and permits
access to the SNMP protocol.
• ro: Specifies read-only access. Authorized
• rw: Specifies read-write access. Authorized
• none: Specifies no access. Management stations
• normal: Specifies that this communtiy string has
• admin: Specifies that this community string has
management stations are only able to retrieve MIB
objects.
management stations are able to both retrieve and
modify MIB objects.
are unable to retrieve or modify MIB objects.
normal level of access within the chassis. (Optional)
admin level of access within the chassis. (Optional)
SNMP
14-15