Set Port Spanning-Tree-Mode - Lucent Technologies Cajun P550 Cli Reference Manual

 . .  **

 
  
   
Enable or disable spanning tree mode for specified switch ports.
Command Syntax
To Enable:
Name
mod-num
mod-port-range
enable|disable
 
This example enables the spanning tree mode for the second switch port on the module
in slot 3 and switch port 7 through 11 on the module in slot 5 of a Cajun P550 or a
P550R.
Cajun(configure)# set port spanning-tree-mode 3/2,5/7-11 enable
Port spanning-tree-mode set: 3/2,5/7,5/8,5/9,5/10,5/11
This example disables the spanning tree mode for the Cajun P220 fast ethernet switch
ports 7 through 11, the Cajun P220 G1 gigabit port, and the Cajun P220
expansion/auxiliary module ports A2 through A4.
Cajun(configure)# set port spanning-tree-mode 7-11,G1,A2-A4
disable
Port spanning-tree-mode set: 7,8,9,10,11,G1,A2,A3,A4
Cajun P550/P220 Command Line Interface Reference Guide

set port spanning-tree-mode

{<mod-num>|<mod-swport-range>}
[...,{<mod-num>|<mod-swport-range>}]{disable|enable}
Table 12-24. Parameters, Keywords, Arguments
Definition
Specifies the number of the module where the spanning
tree mode is to be enabled or disabled for every switch port
on the module.
Specifies a range of switch ports whose spanning tree
mode is to be enabled or disabled.
Enable or disable spanning tree mode for specified
switch ports.
Port
12-33