Set Fabric Toggle-Active-Controller - Lucent Technologies Cajun P550 Cli Reference Manual

Switch Fab
  ** 

 
  
   
Toggles the active controller between the current active controller and the (standby) redundant
controller. The default state is enabled.
This command does not have reverse mapping. The configuration is both user and run-time
modified.

 
To Enable:
 
This example sets the fabric toggle-active-controller.
Cajun(configure)# set fabric toggle-active-controller
16-4

set fabric toggle-active-controller

Cajun P550/P220 Command Line Interface Reference Guide