Ipx Rip-Max-Packetsize - Lucent Technologies Cajun P550 Cli Reference Manual

IPX
.' .*'*. +

    
   
To configure the maximum packet size of RIP updates sent out the interface. To restore
the default packet size, use the no form of this command. The default state is disabled.
Note: On a Cisco system, this command takes packetsize. On the Cajun system, it is a
Boolean.

 
To Enable:
To Disable:
 
Cajun(config-if:serial0)#
   
3-18

ipx rip-max-packetsize

[no] ipx rip-max-packetsize
ipx rip-max-packetsize
Cajun P550/P220 Command Line Interface Reference Guide