.
*
Enable NETBIOS rebroadcasts on an interface. The no form of this command disables
NETBIOS rebroadcasts on an interface.
To Enable:
To Disable:
Name
both|inbound|
outbound|disable
Cajun(config-if:serial0)# ip netbios-rebroadcast inbound
Cajun P550/P220 Command Line Interface Reference Guide
ip netbios-rebroadcast [{both|inbound|outbound|
disable} ]
[no] ip netbios-rebroadcast
Table 1-12. Parameters, Keywords, Arguments
Definition
Indicates how broadcasts are accepted.
• both - inbound and outbound broadcasts are
accepted.
• inbound - only inbound broadcasts are
accepted.
• outbound - only outbound broadcasts are
accepted.
• disable - no broadcasts are accepted.
IP
1-17