Set Port Fast-Start - Lucent Technologies Cajun P550 Cli Reference Manual

 . *

 
  
   
Enable or disable fast start for a specified switch port or all switch ports on a specified module.
Command Syntax
To Enable:
Name
mod-num
mod-port-range
disable|enable
 
This example enables the second switch port on the module in slot 3 and switch ports 7
through 11 on the module in slot 5 of a Cajun P550 or P55R to fast start.
Cajun(configure)# set port fast-start 3/2,5/7-11 enable
Port fast-start set: 3/2,5/7,5/8,5/9,5/10,5/11
This example disables fast start for the Cajun P220 fast ethernet switch ports 7 through
11, the Cajun P220 G1 gigabit port, and the Cajun P220 expansion/auxiliary module
ports A2 through A4.
Cajun(configure)# set port fast-start 7-11,G1,A2-A4 disable
Port fast-start set: 7,8,9,10,11,F1,A2,A3,A4
Cajun P550/P220 Command Line Interface Reference Guide
set port fast-start {<mod-num>|<mod-swport-range>}
[...,{<mod-num>|<mod-swport-range>}]{disable|enable}
Table 12-14. Parameters, Keywords, Arguments
Definition
Specifies the number of the module where every switch
port has the ability to fast start enabled or disabled.
Specifies a range of switch ports whose ability to fast start
is enabled or disabled.
Disables or enables the specified switch ports to fast start.
Port
12-21