Set Port Remote-Fault-Detect - Lucent Technologies Cajun P550 Cli Reference Manual

Port
 . * *


 
  
   
Enable or disable remote fault detections for gigabit ports.
Command Syntax
To Enable:
Name
mod-num
mod-port-range
disable|enable
 
This example enables remote fault detection in gigabit ports 1 and 2 on the module in
slot 3 of a Cajun P550 or P550R.
Cajun(configure)# set port remote-fault-detect 3/1,3/2 enable
Port remote fault detection enable set: 3/1,3/2.
This example disables remote fault detection in the gigabit ports G2 through G4 of a
Cajun P220G.
Cajun(configure)# set port remote-fault-detect G2-G4 disable
Port remote fault detection disable set: G2,G3,G4.
12-32

set port remote-fault-detect

{<mod-num>|<mod-port-range>}
[...,{<mod-num>|<mod-port-range>}]{disable|enable}
Table 12-23. Parameters, Keywords, Arguments
Definition
Specifies the number of the module where the ability to
detect remote link errors for each gigabit port on the
module is to be set.
Specifies a port or a range of gigabit ports whose
ability to detect remote link errors are enabled or
disabled.
Disables or enables the remote fault detection
capability for the specified gigabit ports.
Cajun P550/P220 Command Line Interface Reference Guide