Boot System Flash - Lucent Technologies Cajun P550 Cli Reference Manual

   

 
  
   
Specify the system image that the router loads at startup. Use the no form of this
command to restore the default system flash setting. The default setting is app1.

 
Name
app1|app2
 
This example specifies the system image that the router loads at startup to app2.
Cajun(configure)# boot system flash app2
Cajun P550/P220 Command Line Interface Reference Guide
To Enable:
boot system flash {app1|app2}
Table 18-1. Parameters, Keywords, Arguments
Definition
Choose app1 or app2.
Boot flag set to 'app2'.
System
18-3