*
*
Description
Enable the indicated redundant element.
This command does not have reverse mapping. The configuration is both user and run-time
modified.
Command Syntax
To Enable:
Name
normal |1|2|3|4|5|6
Cajun(configure)# set fabric enable-redundant-element normal 3
Cajun P550/P220 Command Line Interface Reference Guide
set fabric enable-redundant-element {normal
|1|2|3|4|5|6}
Table 16-2. Parameters, Keywords, Arguments
Definition
Required parameter.
• Normal means that the normally enabled redundant
element is turned on.
• 1-6 means that element associated with the number is
turned on.
Switch Fab
16-3