Command Syntax - Lucent Technologies Cajun P550 Cli Reference Manual

OSPF
 * 

   " '
   
Enables the filtering of type 3 ASE LSAs into an OSPF Area. To disable the filtering of
type 3 ASE LSAs, use the no form of this command.

Command Syntax

To Enable:
To Disable:
Name
area-id
10-4
area <area-id> ase-filter
[no] area <area-id> ase-filter
Table 10-2. Parameters, Keywords, Arguments
Definition
IP address that represents the area-id for the system.
Cajun P550/P220 Command Line Interface Reference Guide