Example 4:
Deployment Site Has
DHCP But Local DNS
Domain Differs From
Corporate DNS
Domain
The deployment site in this example has a DHCP server, so the DHCP
client is enabled. Static IP address and default router (gateway)
information are not required. The site also has a local DNS server.
However, the local DNS domain name is different from the corporate DNS
domain name where 3WXM Services are located. The static DNS
configuration on the switch overrides the DNS configuration from the
DHCP server.
1 Configure a VLAN:
W X4400# set vlan 1 port 7
s ucces s : change accept ed.
2 Enable the DHCP client on VLAN 1:
W X4400# set interface 1 ip dhcp-client enable
s ucces s : change accept ed.
3 Configure the default DNS domain name:
W X4400# set ip dns domain examplecorp.com
D om ai n nam e changed
4 Configure DNS server information:
W X4400# set ip dns server 192.168.11.2
5 Enable the MSS DNS client:
W X4400# set ip dns server enable
s ucces s : change accept ed.
6 Enable the auto-config option:
W X4400# set auto-config enable
s ucces s : change accept ed.
7 Save the configuration changes:
W X4400# save config
s ucces s : conf i gur at i on s aved.
8 Power off or restart the switch.
Staging a WX Switch for Configuration by 3WXM
353