Remote Connection; Remote Desktop; Vnc Client - Emerson RXi HMI User Manual

RXi HMI User Manual
GFK-3231A
Section 6:
The RXi HMI can be connected remotely from a local PC. There are two ways to connect remotely:
6.1

Remote Desktop

1. Enable Remote Connection on RXi HMI. Select Start > Settings > System > Remote Desktop
2. On your local PC: In the search box on the taskbar, type Remote Desktop Connection, and then
3. In Remote Desktop Connection, type the IP Address of the RXi HMI you want to connect to and
6.2

VNC Client

The user can use any VNC client software to connect the RXi HMI. To do so the user needs to start
the VNC server on the RXi HMI device.
VNC Server can be launched with the following steps:
Figure 89: Launch the VNC Application

Remote Connection

Remote Connection
and turn on Enable Remote Desktop.
select Remote Desktop Connection.
then select Connect.
1. Launch RXi HMI OI Utilities. Select Yes on UAC prompt dialog.
2. Navigate to the Launch Application page under RXi HMI OI Utilities.
3. Click the VNC icons to launch the application.
Section 6
Jan 2022
62