Software Configuration; Program Settings List - Emerson Rosemount 54eA Manual

Amperometric hart analyzer/controller

Table of Contents

MODEL 54eA

The instrument is configured at the factory to measure oxygen.

Figure 5-1 is an outline of the menu structure.

Table 5-1 lists the default settings and the range of choices available for each setting. To reduce the chance of

error when configuring the controller the first time, enter settings in the order shown in the table.

TABLE 5-1. Program Settings List

ITEM

SETPOINTS

A. Alarms (Section 5.1)

1. Alarm 1 (low action)

a. if oxygen (ppm)

b. if oxygen (ppb)

c. if oxygen (% saturation)

d. if chlorine, monochloramine, or ozone

e. if pH

f. if temperature

2. Alarm 2 (high action)

a. if oxygen (ppm)

b. if oxygen (ppb)

c. if oxygen (% saturation)

d. if chlorine, monochloramine, or ozone

e. if pH

f. if temperature

3. Alarm 3

B. Outputs (Section 5.2 and 5.3)

1. Output 1 or 2: 4 mA setting

a. if oxygen (ppm)

b. if oxygen (ppb)

c. if oxygen (% saturation)

d. if chlorine, monochloramine, or ozone

e. if pH

f. if temperature

2. Output 1 or 2: 20 mA setting

a. if oxygen (ppm)

b. if oxygen (ppb)

c. if oxygen (% saturation)

d. if chlorine, monochloramine, or ozone

e. if pH

f. if temperature

3. Setpoint (PID)

a. if oxygen (ppm)

b. if oxygen (ppb)

c. if oxygen (% saturation)

d. if chlorine, monochloramine, or ozone

e. if pH

f. if temperature

Continued on the following page

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

SECTION 5.0