Operating constraints
September 2020
4.2
Product repair
The Rosemount 5300 Level Transmitter is repairable by major component replacement.
All failures detected by the transmitter diagnostics or by the proof test must be reported.
Feedback can be submitted electronically at
(Contact Us).
4.3
Reset to factory settings
Transmitters with option code QS or QT are shipped with a special factory pre-
configuration. If the device needs to be reset to factory settings, please contact your local
Emerson representative to get the factory pre-configuration file to be uploaded to the
device or use the backup file created upon receiving the transmitter. This will ensure the
proper settings for your safety device are configured and your QS or QT certificate is still
valid.
42
Go.EmersonAutomation.com/Contact-Us
Safety Manual
00809-1900-4530
Safety Manual