ABB RELION REX640 Technical Manual page 1496

Measurement functions
8.3.3 Settings
Setting tables for all A1RADR and A2RADR channels are similar except for the
channel numbers.
Table 1444: A1RADR Non group general settings (basic)
Parameter Values (Range)
Operation
1=on
5=off
Channel id text
High trigger level 0.00...60.00
Low trigger level 0.00...2.00
Table 1445: A1RADR Non group general settings (advanced)
Parameter Values (Range)
Storage mode
0=Waveform
1=Trend / cycle
8.4 Disturbance recorder, binary channels 1...64
B1RBDR and B2RBDR
1496
Values are the same for each input signal. The channel numbers are
shown after the parameter name in the HMI and PCM600.
Unit
Unit
Step Default
1=on
Analog ch 1 input
0.01 10
0.01 0
Step Default
0
1MRS759142 F
Description
Analog channel
on / off
Channel identifier
text
Over limit
Under limit
Description
Storage mode se-
lection (waveform /
trend)
REX640
Technical Manual