Table of Contents
Advertisement
Virtual Private Networks (VPN)
Configure a DMVPN spoke
To configure a DMVPN spoke:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Create an IP tunnel.
a. Click VPN > IP Tunnels.
b. In Add IP tunnel, type the name of the tunnel and click .
c. For Mode, select mGRE.
d. For Local endpoint, select the interface that will serve as the local endpoint of the tunnel.
e. For Key, type a four-octet value that matches the key on the remote endpoint.
Digi Connect IT® 4 User Guide
Dynamic Multipoint VPN (DMVPN)
Use Digi Remote Manager to view and manage your
434
Advertisement
Table of Contents
