Digi Connect IT 4 User Manual page 479

Services
0siGswIauBd8BrZMIWf8JBUIC5EGkMiIyNpLJqPbGEImMUXk4Zane/cL7e06U8ft
BUtOtMefbBDDxpP+E+iIiuM=
-----END PRIVATE KEY-----"
(config)>
5. (Optional) Configure Multicast DNS (mDNS):
mDNS is a protocol that resolves host names in small networks that do not have a DNS server.
mDNS is enabled by default. To disable mDNS, or enable it if it has been disabled:
To enable the mDNS protocol:
n
(config)> service web_admin mdns enable true
(config>
To disable the mDNS protocl:
n
(config)> service web_admin mdns enable false
(config)>
6. (Optional) Set the port number for this service.
The default setting of 443 normally should not be changed.
(config)> service web_admin port 444
(config)>
7. (Optional) Set the minimum TLS version that can be used by client to negotiate the HTTPS
session:
(config)> service web_admin legacy_encryption value
(config)>
where value is one of:
TLS-1_1
n
TLS-1_2
n
TLS-1_3
n
The default is TLS-1_2.
8. (Optional) Disable legacy port redirection.
Legacy port redirection is used to redirect client HTTP requests to the HTTPS service. Legacy
port redirection is enabled by default, and normally these settings should not be changed.
To disable legacy port redirection:
(config)> service web_admin legacy enable false
(config)>
9. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
Digi Connect IT® 4 User Guide
Configure the web administration service
479