Digi Connect IT 4 User Manual page 253

Serial port
Item Description
 Click the  (configuration) icon in the upper right corner of the page to access the
configuration
Serial Configuration page. See
icon
Status Displays the connection status.
Port A list of the ports on the device.
The port number and name displays as a link when the port is configured for
remote access. You can click the port number or name to connect to the port in the
terminal page.
While you are connected to the terminal, the port status displays in the Status
column as CONNECTED, and the name of the user logged into the device displays in
the User column.
Label A description for the port.
You can change this from the Serial Configuration page. Click the 
(configuration) icon in the upper right corner of the page to access that page.
The port number and name displays as a link when the port is configured for
remote access. You can click the port number or name to connect to the port in the
terminal page. See the description for
Power Displays the power status of the outlet on a power controller for which this serial
port is configured as a controlled device.
You can click the ON or OFF status button to turn the power to that outlet on or
off.
See
Serial Status
Log If configured, you can open the Serial Port Log page for that port. Options are:
User When the port is connected to a terminal, SSH, TCP, or Telnet connection the name
of the user logged into the device displays.
Digi Connect IT® 4 User Guide
CONNECTED: A terminal, SSH, TCP, or telnet session is active.
n
NO SIGNAL: CTS or DCD is not active on the port.
n
1. Click the link to connect to the port in the terminal page.
2. In the terminal screen, enter ~b? to display additional commands. See
Access the terminal screen from the web UI
commands.
Configure Remote Power Management
page.
Green Log button: The serial port mode selected for the port supports
n
serial port logging, and logging is enabled. Click the Log button to open the
Serial Port Log page for that port. See
for information about that page.
Gray Log button: The serial port mode selected for the port supports serial
n
port logging, but logging is not enabled.
No button: The serial port mode selected for the port does not support
n
serial port logging.
Show serial status and statistics
Serial port for more information.
for more information about the
Port (above) for more information.
and Control the outlet power from the
Review the serial port message log
253