Table of Contents
Advertisement
Routing
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Dynamic DNS.
4. Type a name for this Dynamic DNS instance in Add Service and click .
The Dynamic DNS configuration page displays.
New Dynamic DNS configurations are enabled by default. To disable, toggle off Enable.
5. For Interface, select the interface that has its IP address registered with the Dynamic DNS
provider.
Digi Connect IT® 4 User Guide
Use Digi Remote Manager to view and manage your
Dynamic DNS
277
Advertisement
Table of Contents
