Digi Connect IT 4 User Manual page 714

User authentication
serialuser1 with access to serial port 1.
n
serialuser2 with access to serial ports 2, 4, and 8.
n
This example uses a FreeRadius 3.0 server running on ubuntu. Server configuration may vary
depending on the platforms or type of servers used in your environment.

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Configure the device to use RADIUS authentication:
a. Click Authentication > Methods.
b. For Add Method, click  to add a new method.
c. For the new method, select RADIUS.
Note If you want other users to authenticate via other authentication methods, you should
include those authentication methods in this list. For example, if you want administrators of
the Connect IT 4 to log into the device using local authentication, make sure that Local users
authentication is included in the Methods list. Otherwise they will not be able to log into the
device.
4. Create the authentication groups.
In this example, we are adding two groups, serialgroup1 and serialgroup2.
a. In Add Group, type serialgroup1 and click .
b. Repeat for the second group: For Add Group:, type serialgroup2 and click .
c. For serialgroup1:
i. Click Serial access to enable serial access.
ii. Click Serial ports.
Digi Connect IT® 4 User Guide
Use Digi Remote Manager to view and manage your
Example user configuration
714