Display Help For The Config Command From The Root Admin Cli Prompt - Digi Connect IT 4 User Manual

Command line interface
Display help for the config command from the root Admin CLI
prompt
Display additional configuration commands, as well as available parameters and values, by entering
the question mark (?) character after the config command.
1. For example:
> config ?
Will display the following help information:
> config ?
Additional Configuration
--------------------------------------------------------------------------
application
auth
cloud
firewall
monitoring
network
serial
service
system
vpn
Run "config" with no arguments to enter the configuration editing mode.
> config
2. You can then display help for the additional configuration commands. For example, to display
help for the config service command:
> config service ?
Services
Additional Configuration
--------------------------------------------------------------------------
dns
mdns
multicast
ntp
remote_control
snmp
ssh
telnet
web_admin
> config service
Digi Connect IT® 4 User Guide
Execute configuration commands at the root Admin CLI prompt
Custom scripts
Authentication
Central management
Firewall
Monitoring
Network
Serial
Services
System
VPN
DNS
Service Discovery (mDNS)
Multicast
NTP
Remote control
SNMP
SSH
Telnet
Web administration
922