Digi Connect IT 4 User Manual page 828

Central management
(config)> cloud drm reboot_timeout 600s
(config)>
The minimum value is 30 minutes and the maximum is 48 hours. If not set, this option is
disabled. The default is disabled.
11. firmware_url should normally be left at the default location. To change:
(config)> cloud drm firmware_url url
(config)>
12. (Optional) Set the hostname or IP address of the speedtest server. The default is
speedtest.accns.com.
(config)> cloud drm speedtest_server name
(config)>
13. (Optional) Determine whether to require a login and password to authenticate the user from
the remote cloud services CLI:
(config)> cloud drm cli_local_auth true
(config)>
If set to false, no login prompt will be presented and the user will be logged in as admin. The
default is false.
14. (Optional) Configure the Connect IT 4 device to communicate with remote cloud services by
using SMS:
a. Enable SMS messaging:
(config)> cloud drm sms enable true
(config)>
b. Set the phone number for Digi Remote Manager:
(config)> cloud drm sms destination value
(config)>
where value is either:
n
n
c. (Optional) Set the service identifier:
(config)> cloud drm sms sercice_id id
(config)>
15. (Optional) Configure the Connect IT 4 device to communicate with remote cloud services by
using an HTTP proxy server:
a. Enable the use of an HTTP proxy server:
(config)> cloud drm proxy enable true
(config)>
Digi Connect IT® 4 User Guide
Within the US: 12029823370
International: 447537431797
Configure your device for Digi Remote Manager support
828