Digi Connect IT 4 User Manual page 119

Interfaces
The Carrier Scan window opens.
4. (Optional) Change the Timeout for the carrier scan. The default is 300 seconds.
5. When the Carrier Scan window opens, the results of the most recent previous scan are
displayed. If there is no previous scan available, or to refresh the list, click SCAN.
6. The current carrier is highlighted in green. To switch to a different carrier:
a. Highlight the appropriate carrier and click SELECT.
The Carrier selection dialog opens.
b. For Carrier selection mode, select one of the following:
n
n

Command line
Digi Connect IT® 4 User Guide
Manual/Automatic: The device will use automatic carrier selection if this carrier is
not available.
Manual: Does not allow the device to use automatic carrier selection if this carrier
is not available.
Note If Manual is selected, your modem must support the Network technology or
the modem will lose cellular connectivity. If you are using a cellular connection to
perform this procedure, you may lose your connection and the device will no longer
be accessible.
Wide Area Networks (WANs)
119