Digi Connect IT 4 User Manual page 131

Interfaces
(config network interface my_wan)> ipv4 dhcp_hostname true
(config network interface my_wan)>
7. (Optional) Configure IPv6 settings:
a. Enable IPv6 support:
(config network interface my_wan)> ipv6 enable true
(config network interface my_wan)>
b. Set the IPv6 type to DHCP:
(config network interface my_wan)> ipv6 type dhcpv6
(config network interface my_wan)>
c. Generally, the default settings for IPv6 support are sufficient. You can view the default IPv6
settings by using the question mark (?):
(config network interface my_wan)> ipv6 ?
IPv6
Parameters
-----------------------------------------------------------------------
--------
dhcp_hostname
enable
metric
mgmt
mtu
type
use_dns
weight
Additional Configuration
-----------------------------------------------------------------------
--------
connection_monitor
(config network interface my_wan)>
d. Modify any of the remaining default settings as appropriate. For example, to change the
metric:
(config network interface my_wan)> ipv6 metric 1
(config network interface my_wan)>
If the minimum length is not available, then a longer prefix will be used.
Digi Connect IT® 4 User Guide
See RFC4702 for further information about DHCP server support for the Client
n
FQDN option.
See Configure system information
n
4 device's system name.
Current Value
false
true
0
0
1500
dhcpv6
always
10
Active recovery
Wide Area Networks (WANs)
for information about setting the Connect IT
DHCP Hostname
Enable
Metric
Management priority
MTU
Type
Use DNS
Weight
131